Safety Mat Switch for Dorp Tester and Shock Tester
It is one of the easy and efficient measures to use Safety Mat Switch, in order to protect workers from the dangerous area of the Drop / Shock tester circumference.
When workers and things are on Safety Mat Switch, it enables control of suspending rise-and-fall equipment or repealing fall operation, and prevents an accident.
Moreover, a worker’s operation is not barred by using Safety Mat Switch.
•Easy to use because Safety Mat Switch just set on a floor.
•There is no malfunction because it equipped the disconnection recognition function (in the case of a 4-wire system).
•There is no malfunction by radio disturbance, a noise, etc.
•Form and size can be selected according to a setting position.
•one or more sheets is possible.
•In the case where two or more Safety Mat Switchs are installed, it is easy to use because between mat switches is connected by a connector.
|Model||Safety Mat Switch|
|Voltage rating||DC24V (*2)|
|The minimum detection load capacity||approx. 10 kg / 20 cm2|
|(approx lbs / inch2)||approx. 22 lbs/ 7.9 inch2|
|Load capacity||approx. 150 kg / 20 cm2|
|(approx lbs / inch2)||approx. 330.7 lbs / 7.9 inch2|
|Wire connection||Connected in series|
|Size (H x W mm)||1000 x 300, 2000 x 500 and etc.|
|(approx inch)||39.3 x 11.8, 78.7 x 19.7 and etc.|
|Other||Combined use with other safeguards is also possible.|