Sample wide up to 150mm, CE Marking
Drop Tester / Drop Machine for smartphones, cell phones, and mobile gadgets. DT-202

Enable to test the endurance against drop impact. DT-202 provide fragility test for smart phones, cell phones and other mobile gadgets. The specimen holding system can keep the dropping posture, enable to provide drop tests superior in reproducibility.
Drop Tester DT-202 comply with CE marking requirements.


•Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
•The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
•Safety design – the electromagnetic holder never release the specimen holding system till it’s energized.


•Drop test for digital gadgets ; smart phones, cell phones, and digital gadgets.
•Drop test for any electrical parts and small, light-weight object.


Model DT-202
Specimen max weight 2 kg
(approx lbs) 4.4 lbs
Drop height range (mm) 250 mm up to 2000 mm
(approx inch) 10 inch up to 78 inch
Drop height setting Scale and setting pointer
Holding / Releasing specimen Pneumatic pen cylinder
Size (W x H x D mm) 600 x 2382 x 500
(approx inch) 23.62 x 93.78 x 19.69
Weight 80 kg
(approx lbs) 176 lbs
Power supply 100-240V single-phase 5A
Applied Standards JIS C 60068-2-31, IEC 60068-2-31
Supply Air Pressure 0.49Mpa is required ( 1.2dm3 when tests 6 times / min )

Detail drawing of supporting base.

Drop Machine DT-202 Detail drawing of supporting base.