m-Series (Low Acoustic Noise and Compact Range)

Silent type appropriate for abnormal noise inspectionCompact and silent design, but also powerful for full-scale test.

Features

■Silent design employing a built-in cooling fan: DC powered cooling fan is built-into the shaker. Natural air cooling is also used when the cooling fan is stopped for silent operation. (with a reduction in performance)

Table Insert Pattern

Specifications

System Model			m030/MA1-CE	m060/MA1-CE	m120/MA1-CE	m030H/MA1	m130LS/MA1-CE
System Specifications	Frequency Range(Hz)		0-3000	0-3000	0-2000	1000-10000	2-1000
	Rated Force	Sine(N)	300	600	1200	380	1300
		Random(N rms)	210	420	840	266	650
		Shock(N)	300	600	1200	380	1300
	Maximum Acc.	No load(m/s²)	500	500	500	200	130
		0.5kg load(m/s²)	272	352	413	158	123
		1.0kg load(m/s²)	187	272	352	131	118
	Maximum Velocity (m/s)		1.6	1.6	1.6	– ^*1	1.0
	Maximum Displacement (mmp-p)		26	30	30	– ^*1	51.0
	Maximum Load(kg）		15	15	120	15	100
	Power Requirements(kVA) ^*2		0.4	0.7	1.1	0.5	1.1
Vibration Generator	Model		m030-CE	m060-CE	m120-CE	m030H	m130LS-CE
	Armature Support Method		Diaphragm spring	Diaphragm spring	Air Suspension	Rubber spring	Air Suspension
	Armature Mass(kg)		0.6	1.2	2.4	1.9	10
	Armature Diameter(φmm)		114	114	174	65	180
	Dimensions(mm)		φ190 × H240	φ230 × H281	φ320 × H327^*3	φ190 × H275	W410 × H592 × D460
	Mass(kg)		22	40	110	30	250
Power Amplifier	Model		MA1-CE	MA1-CE	MA1-CE	MA1-CE	MA1-CE
	Maximum Output(kVA)		1.0	1.0	1.0	1.0	1.0
	Dimensions(mm)WxHxD		430 × 149 × 430	430 × 149 × 430	430 × 149 × 430	430 × 149 × 430	430 × 149 × 430
	Mass(kg)		25	25	25	25	25
	Cooling Method		Air cooling
Cooling	Blower		Housed in vibration generator

1 The displacement at the lower limit of frequency (1000 Hz) and maximum acceleration (200 m/s²) is so small that there is no certified value.
2 Power supply: single-phase 100 V or 200-240 V, 50/60 Hz. A transformer is required for other supply voltages.
3 Insulation pad (W410 x H45 x D410 mm) is standard equipment.
The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70 % must be applied. Continuous use at maximum levels may cause failure. Please contact IMV if you use more than 70 %.
Frequency range values vary according to sensor and vibration controller.

2-axis changeover vibration test system

■ m-series multi-axis system

A range of small-size systems, including 2-axis and 3-axis simultaneous systems, employing the popular m-series vibration generators and patented Integrated Cross Coupling Bearing Unit (ICCU) multi-axis armature / load support technology.

●Compact design

●Low noise (ideal for squeak-rattle testing)

●High precision measurement

●Low power consumption

■ System specifications

Rated force	1200N
Table size	200×200mm
Maximum frequency	500Hz
Maximum acceleration	30m/s²
Maximum displacement	10mmp-p
Maximum payload	10kg
Cooling method	Air cooling
System noise	55dB(A)
Weight	Approx. 730kg
Power requirements	3φ200V, 4kVA

Outward Dimensions

m030-CE

m060-CE

m120-CE

m130LS-CE

Options

Head expander

Model	Dimensions (mm)	Mass(kg)	Maximum Frequency (Hz)	m030-CE	m060-CE	m120-CE
TBV-125-□-A	125×125×t20	0.9	2000	○	○
TBV-200-□-A	200×200×t20	2.5	1500	○^*	○	○
TBV-315-□-A	315×315×t30	8.5	1000		○^*	○
^*TBV-400-□-A	400×400×t35	14.4	600			○^*

Head expander

“-A” at the end of model number shows that material is aluminum alloy.
Add the vibration generator type where “□” is shown.

* The supplementary guidance system using linear bearings is used with the vibration generator when combined with the head expander.

Slip table

Model	Dimensions (mm)	Maximum Frequency (Hz)	Mass (kg)
Model	Dimensions (mm)	Maximum Frequency (Hz)	m030-CE	m060-CE	m120-CE
TBH-200	200×200	500	4	4	5.5
TBH-315	315×315	500	7.5	7.5	9
TBH-400	400×400	500	━	12.3	14

Slip table